Veeraja Industries
Veeraja Industries
Shivane, Pune, Maharashtra
Send E-mail
Send SMS

Centralized Coolant Filtration Systems


Providing you the best range of Centralized Coolant Filtration Systems such as Centralized Filtration Systems, Coolant Filtration Systems, Roll Coolant Systems and Cast Iron Machining Filtration Systems with effective & timely delivery.

Ask for Price

Price on Request: Get Latest Price

Product Details:
maintenanceMulti paneled drum for ease of mesh maintenance.
DrumsMultiple drums for larger systems. Drums can be isolated individually.
DesignCustomized design to suit your specific requirement.

Aluminium is vastly used in automobile components. Various operations like drilling tapping on such components generate large quantum of chips. Individual filtration system are prone to breakdowns and do not give required filtration levels resulting in low coolant life.

In a CFS, Dirty fluid along with chips is collected in the dirty tank. This tank has a continuously moving scarper conveyor which removes the chips that settle down. A rotating mesh drum is placed inside this tank. The fluid passes through the mesh drum while the chips are separated on the outside. The filtered fluid drops into a clean tank. Clean fluid pump supply pressurized fluid to the machines. Sizing of the tanks, mesh drum and pumps is done based on your total flow requirement. In addition fine filter housing can be provided for through spindle coolant.


Yes! I am Interested


Ask for Price

Price on Request: Get Latest Price

Product Details:
Chip cutterMulti cutter chip cutter for built mechanical and electrical safety.
drumMultiple drums and drums can be isolated individually.

Steel because of its ductile and tensile strength is widely used in auto component industry. But steel machining generally generates long curly chips. These chips are difficult to handle and donot flow with the help of pressurized coolant flow. Due to this restriction making a CFS was always a challenge.

Veeraja has now developed a unique chip cutter which can be attached to the outlet of individual chip conveyor of each machine. This chip cutter shreds the steel chips ( watch video ) into smaller manageable size. These can now be conveyed using traditional methods of gradient gravity flow.

In a CFS, Dirty fluid along with chips is collected in the dirty tank. This tank has a continuously moving scarper conveyor which removes the chips that settle down. The coolant then passes through drum type magnetic seperators mounted on the side walls of the scraper conveyors. This ensures that the complete flow passes through a dense magnetic grid. The filtered fluid drops into a clean tank. Clean fluid pump supply pressurized fluid to the machines. Sizing of the tanks, magnetic drums and pumps is done based on your total flow requirement. In addition fine filter housing can be provided for through spindle coolant.


Yes! I am Interested


Ask for Price

Price on Request: Get Latest Price

Product Details:
drumsIndependently rotating magnetic drums with finned pole plates increase the magnetic density.
DesignCustomized design to suit your specific requirement.

Cast Iron is used for most major engine components and motion transmission. Various operations like drilling tapping and turning on such components generate large quantum of chips. Indivisual filtration system are prone to breakdowns and donot give required filtration levels resulting in low coolant life.

In a CFS, Dirty fluid along with chips is collected in the dirty tank. This tank has a continuously moving scarper conveyor which removes the chips that settle down. The coolant then passes through drum type magnetic seperators mounted on the side walls of the scraper conveyors. This ensures that the complete flow passes through a dense magnetic grid. The filtered fluid drops into a clean tank. Clean fluid pump supply pressurized fluid to the machines. Sizing of the tanks, magnetic drums and pumps is done based on your total flow requirement. In addition fine filter housing can be provided for through spindle coolant.


Yes! I am Interested


Ask for Price

Price on Request: Get Latest Price

Product Details:
DrumsIndependently rotating magnetic drums with finned pole plates increase the magnetic density.
Chip cutterMulti cutter chip cutter for built mechanical and electrical safety.
MaintenanceOur unique pole plate design and scraper arrangement improves magnetic separation efficiency and eas

Grinding process is used to generate better surface finish on components. Alongwith the removal of metal particle, the grinding wheel is also consumed. If proper filtration is not provided these particles escape the filtration system and generate scratch marks on the surface deteriorating the Ra and Rz values. The particles also clog the grinding wheel, which needs to re-dressed frequently. This increases the consumption of the grinding wheel.

A CFS for Grinding process is sized based on wheel grit size, viscosity of fluid and material of component. As the viscosity increases or the grit size becomes finer, the flow velocity through filter media has to be reduced to achieve desired results.

A CFS for grinding is similar to indivisual filtration system but at a much larger scale. Dirty fluid alongwith grinding muck falls into the vacuum filter. Dirt cake is generated on the filter media ( check the actual working ). Clean fluid is directly pumped back to the machines.



Yes! I am Interested


REQUEST CALLBACK
Ask for Price

Price on Request: Get Latest Price

Product Details:
DesignCustomized design to suit your specific requirement.
FilterMagnetic separator and Vacuum filter can be added to reduce the load ion finer filtration

Honing is a very material removal process used to generate better surface finish on components. If proper filtration is not provided these particles escape the filtration system and generate scratch marks on the surface deteriorating the Ra and Rz values.

A CFS for Honing process is sized based on grit size, viscosity of fluid and material of component. As the viscosity increases or the grit size becomes finer, the flow velocity through filter media has to be reduced to achieve desired results.

Dirty fluid alongwith grinding muck falls into the vacuum filter. Dirt cake is generated on the filter media ( check the actual working ). Clean fluid is directly pumped to next stage of filtration system. In this stage either a backwashable candle filter or precoat filter is used based on the process requirement. These filters generate a filtration level of 1 micron.

The filtered fluid is stored in tanks from where a different set of pumps delivers it to your machines.If the muck generation is very low, the first stage filtration of vacuum filter is eliminated and only the finer filters are used.


Yes! I am Interested


Ask for Price

Price on Request: Get Latest Price

Product Details:
Magnetic Separators1. Vertical or horizontal candle 2. Simple and rugged design for 24x7 operation

Cold rolling mills filtration system has many functions. It has to remove the scale and scum generated during rolling. The temperature has to be controlled along with flow and pressure.

A cold rolling mill system usually consists of a large tank. The dirty fluid enters into the dirty fluid compartment. Using baffles the complete flow is passed through Magnetic separator into the semi clean compartment. This fluid is then sucked by large pumps and passed through self-cleaning filter and PHE skid to control the temperature. A pressure control valve ensures constant pressure is supplied to the mill.

The tanks have agitators to continuously mix the coolant. Belt skimmers are also mounted on the tank to remove the floating scum. To maintain the temperature of the tank, either electrical heaters are placed in thermic fluid tubes or the coolant is passed through housing heated by electrical heaters or steam. If finer filtration required then a different set of pumps are used to transfer dirty fluid to pneumatic vacuum filters.


Yes! I am Interested


Ask for Price

Price on Request: Get Latest Price

Product Details:
DesignComplete in house design and manufacturing of all products required in the system

Galvanising line filtration system has many functions. It has to remove the scale and scum generated during rolling. The temperature has to be controlled along with flow and pressure.

A Galvanising line system usually consists of a large tank. The dirty fluid enters into the dirty fluid compartment. Using baffles the complete flow is passed through Magnetic separator into the semi clean compartment. This fluid is then sucked by large pumps and passed through self-cleaning filter and PHE skid to control the temperature. A pressure control valve ensures constant pressure is supplied to the mill.

The tanks have agitators to continuously mix the coolant. Belt skimmers are also mounted on the tank to remove the floating scum. To maintain the temperature of the tank, either electrical heaters are placed in thermic fluid tubes or the coolant is passed through housing heated by electrical heaters or steam. If finer filtration required then a different set of pumps are used to transfer dirty fluid to pneumatic vacuum filters.


Yes! I am Interested


Ask for Price

Price on Request: Get Latest Price

A pickling line requires a tank to prepare the solution. Because of the fluid properties this tank is generally of stainless Steel material. For the proper functioning of the line, the fluid has to be prepared with a proper concentration. Mixing of the powder with the fluid has to be proper. A screw conveyor is used to drop specific quantity of powder in the tank. It has a hopper to store the powder.

An agitator is used to mix the powder properly. A pumping station pumps the fluid back to the process.


Yes! I am Interested


REQUEST CALLBACK
Ask for Price

Price on Request: Get Latest Price

Product Details:
Filtration capacity50 l/min to 3000 l/min. Used in parallel for higher flows.
MaintenanceEase of maintenance
DesignCustomized design to suit your specific requirement.

Gravity filters take a large shop floor area. When there is restriction in space available a Compact band is suggested. As the dirty fluid is transferred using a pump, this filtration system can be placed away from the machine also.

In this filter the filter paper is held between a pair of sealing discs & a permeable support belt. Dirty fluid is dropped in the trough formed with filter paper at the bottom. The fluid passes through the filter paper leaving the dirt on it. The layer of dirt gathered on the filter paper achieves finer filtration. The filter is mounted directly on top of the tank, letting clean fluid in the tank.

As the filter paper chokes, the fluid level above the filter paper rises. This activates a level switch, starting a drive coupled to the rollers, supporting the permeable support belt. This ejects part of the dirty filter paper & dirt to bin, pulling in clean filter paper from the roll.


Yes! I am Interested


REQUEST CALLBACK
Ask for Price

Price on Request: Get Latest Price

Band filter are the simplest and oldest form of filters. Veeraja ECO Band filter is one more step towards additional simplicity. This band filter does not have a moving conveyor. This eliminates the maintenance concerns of jamming and breaking of conveyor. A standard magnetic separator can also be added to improve on the efficiency of the band filter.

  • Filter media is laid on conveyor. This is fitted on tank.
  • Dirty fluid drops on the media.
  • Clean fluid is collected in the tank below and pumped back.
  • When media chokes, level starts rising above the media. This is sensed by a level switch.
  • Dirty media is conveyed out by geared motor.

Yes! I am Interested


REQUEST CALLBACK
Ask for Price

Price on Request: Get Latest Price

  • Vacuum filters primarily work on Vacuum principle.
  • Vacuum is created in a chamber by pump suction or ventury.
  • The chamber forms the bottom portion of tank which receives the dirty fluid from machine.
  • Filter media ( paper / mesh ) is laid on top of this chamber.
  • Fluid passes through media to chamber.
  • Dirt is collected on the media.
  • When media chokes, vacuum increases which is sensed by switch.
  • Dirt media is pulled out by geared motor.

Yes! I am Interested


Price on Request: Get Latest Price

Swarf is generated in any type of material removing process. The swarf generated in machining is typically is of high volume and weight. Transportation of these chips from the point of generation to the scarp yard is a very tedious, time consuming and labourious job. Leaking coolant from these chips also makes the shop floor look dirty. If these chips generated are curly it adds to these problems.

Veeraja provides complete solution of swarf removal from machine bed , common conveying systems, chip crushers and chip briquetting machines.


Yes! I am Interested


 

Explore More Products
 

 

Send SMS
Veeraja Industries
Pinakin Mate  (CEO)
S. No. 78/1, Shed No. 6, Shantiban Industrial Estate Village Shivane, Taluka Haveli
Pune - 411023 , Maharashtra , India
Send E-mail
Share Us:
X